MGPM12G - 30Nil SMC MGPM MGPL Double Acting Cylinder Pneumatic GMPM12-30Z

MGPM12G - 30Nil SMC MGPM MGPL Double Acting Cylinder Pneumatic GMPM12-30Z
 
Ordering Code: MGPM12G-30Nil, Any other types please contact freely. 

Order code

Specifications

Manufacture of Intermediate Strokes

Installations

1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be cleared away before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.The medium used by cylinder shall be filtered to 40μm or below.
6.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
8.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and  guide is high, never dismantle the fixed block or cylinder cover without permission.

Constructure and Material

Structures
1. ø12 to ø25/MGPM, MGPL

2. ø32 to ø63/MGPM, MGPL

3. ø80, ø100/MGPM, MGPL

Product show


Products Shopping Guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.

Samples
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.

Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. Also we can send by your delivery acount if you want.
3. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
 
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.