|Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, Chinafirstname.lastname@example.org|
|Place of Origin:||CHINA|
|Minimum Order Quantity:||1|
|Packaging Details:||Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement|
|Delivery Time:||within 1-10 working days after payment|
|Payment Terms:||T/T , Western Union, PayPal|
|Supply Ability:||1000 pcs /day|
|Material:||Aluminium||Regulator Lockting:||Rotary Knob With Detent|
air preparation unit,
compressed air preparation
Festo Voltage regulator HR-1/4-D-MINI-E 1/4“ Blue turn-button Aluminum Body Length 63.5mm
1..High flow rate
2.Two pressure gauge connections for different fitting options
3.Good regulating characteristics with minimal pressure hysteresis
4.Two pressure regulation ranges: 0.5 … 7 bar and 0.5 … 12 bar
5.Setting values are secured by locking the rotary knob
6.Return flow option for venting from output 2 to input 1
7.Pressure sensor (optional) → 52
8.Also suitable for front panel mounting
Conditions of use
●Observe if the fting conditions meet the requirements of the techinical values(e.g. for pressures,temperatures,etc)
●Take into account mediums and the prevailing ambient conditions,try to avoidchlorine carbon compound and aromatic compound, oxidizing acid and strongalkali, in order to protect the filter and oil bowls from damaging.
●Slowly pressurize your complete system to prevent sudden uncontrolled movements.
●Aways use the product in its original state. Unauthorized modifications are
●Use shut-off valves for making the system pressureless for fitting and maintenance
(e.g. when changing the filter).
●Note the direction of flow. This can be seen on the connecting flanges.
●Leave sufficient space below the filter bowl (min. 60mm) for changing the filter.
●Adjust the F... ..vertically (+5), ftting in the fixed tubing
●Screw the tubing into the connecting flanges. The threads must be sealed.Fitting the manometer:
' Screw the manometer into the existing threaded connector. The manometer sealis already fitted onto the threaded connector pin of the manometer.
The alternative connection is closed with a blind plug. If necessary, replace theblind plug (ind. seal).
●Connect the tubing to the pneumatic connections.Requirements of adding oil to oil bowls as follows:
●Shut off valves and exhaust operating pressure; Or no need close air just turnrelease nut, then you can put oil
●Turn oil bowis in the anti-clockwise direction
●The oil level no exceed two-thirds volume of the bowl.Recommended oil: lSO VG-32 or the same grade
|Pneumatic connection||M5, M7, G1/8, QS-4,QS-6||G1/8, G1/4, G3/8||G1/4, G3/8, G1/2, G3/4||G1/2,G3/4,G1|
|Constructional design||Directly actuated diaphragm regulator||Directly actuated diaphragm regulator||Pilot actuated piston
|Regulating function||With secondary venting||Output pressure constant, with secondary venting, with
primary pressure compensation, with return flow action
|Output pressure constant,
with secondary venting, with
primary pressure compensation,
with return flow action
|Type of mounting||1.Via accessories 2.In-line installation 3.Front panel mounting|
|Regulator lock||Rotary knob with detent|
|-||Rotary knob with integrated lock|
|Pressure regulation range [bar]||0.5 … 7||0.5 … 7|
|0.5 … 12|
|Max. hysteresis [bar]||0.3||0.2||0.4|
|Pressure indication||Via pressure gauge|
|M5 prepared||G1/8 prepared||G1/4prepared||G1/4prepared|
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
Products shopping guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
0:00 - 23:59
From Monday to Sunday
Contact Person: Jaren