|Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, Chinafirstname.lastname@example.org|
|Place of Origin:||CHINA|
|Minimum Order Quantity:||1|
|Packaging Details:||Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement|
|Delivery Time:||within 1-10 working days after payment|
|Supply Ability:||1000 pcs /day|
|Body Material:||Aluminum Alloy||Ambient And Fluid Temperature:||-10℃ To 60℃|
|Mode Of Action:||Double Acting||Rubber Magnet:||Synthetic Rubber|
pneumatic actuator cylinder,
smc pneumatic cylinder
MHL2-10D2 Double acting 0.1 to 0.6 Mpa Synthetic rubber Rack Staninless Steel Air cylinder
1.One unit can handle workpieces withvarious diameters.
2.A large amount of gripping force isprovided through the use of adouble piston mechanism, whilemaintaining a compact design.
3.Double-end type oil-impregnatedresin bearings with a metal backingare used for all shafts.
4.Built-in dust-protection mechanismA high degree of freedom formounting
5.Auto switch mountable
The workpiece gripping point distance should be within the grippingforce ranges given for each pressure in the effective gripping forcegraphs below.
operated with the workpiece gripping point beyond the indicatedranges, the load that will be applied to the fingers or the guide willbecome excessively unbalanced.
As a result, the fingers couldbecome loosened and adversely affect the service life of the unit.
Effective Gripping Force
Indication of effective gripping force.The gripping force shown in the tablesrepresents the gripping force of onefinger when all fingers and attachmentsare in contact with the work.F = one finger thrust.
How to Mount the Attachment to the Finger
(1) Make sure that the piston rod is retracted so as not to apply undue strain on the piston rod whilean attachment is being mounted to the finger.
(2) Do not scratch or dent the sliding portion of the piston rod. Damage to the bearings or sealsmay cause air leaks or faulty operation.
(3) Refer to the table below for the proper tightening torque on the bolt used for securing theattachment to the finger.
Auto Switch Mounting Brackets: Precautions
When auto switch is set on the mounting side as shown below, allow atleast 2 mm run off space on mounting plate since the auto switch isprotruded from the gripper edge.
If a workpiece is hooked onto the attachment, make sure that excessive impact willnot be created at the start and the end of the movement.
Failure to observe this precaution may result in shifting or dropping the workpiece,which could be dangerous.
|Operating pressure(Mpa)||0.15 to 0.6||0.1 to 0.6|
|Ambient and fluid temperature||-10 to 60 ℃|
|Effective gripping force (N)
at 0.5 Mpa
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
Products shopping guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.