High Temp Car Auto Parts Manifolds Exhaust Pipe Split Flange

High Temp Car Auto Parts Manifolds Exhaust Pipe Split Flange

DOWN/DUMP  Exhaust manifolds flange Aluminium

Description                                                                                                                                                     

1. The flange plate is mainly used in automobile exhaust tailpipes.

2. They're made of material of aluminium  that's suitable for high-temperature  service and will mate same-size

exhaust flanges to ensure an  accurate, tight, leakproof seal for your exhaust components.

3. Vibrant exhaust flange gaskets are designed for both 2-bolt and 3-bolt flanged connections.

Pictures Show                                                                                                                                                

Characteristic                                                                                                                                                

Repairing the Manifold                                                                                                                                   

1. Clean the  manifold and the broken off flange well.

2. Be certain the parts are free of rust and carbon.

3. Nest the flange back into position to make sure  it will mate properly and be in the original plane.

4. Clamp the broken flange with Vise-Grips at the edge furthest from the joint.

5. Heat the joint with a torch while holding the flange in place. Apply heat until the native metal begins to

melt and puddle. Begin feeding the iron brazing rod into the puddle as the puddle begins to form.

6. Move the torch focal point and  the rod along the joint with a steady and slow motion, constantly melting

the native metal and replacing it with the rod material.

7. Braze as much  as possible before stopping to flip the manifold to can gain access to the other side.

Continue this process until the entire joint has been brazed.

In addition                                                                                                                                                      

1. The shape is beautiful.It has long service life,and high quality material.

2. We use the machine of CNC to machining it.

3. The product dose not exceed the tolerance range 0.02mm.

4. If you have received a product has any problem ,please contact the customer service the first time.