Dump Truck Rubber Handle Valve M6 Control BKQF34-B 14750650H

BKQF34-B 14750650H Dump Truck Rubber Handle Valve M6 Control Valve

Product Description
1 section air control range:
part no. description
147 50 665H control pneumatic - 1 - TF/LF
147 50 667H control pneumatic - 1 - TS/LF

Explanation of codes:
1 = control has 1 section
TF = lever is fixed in tipping end position
TS = lever has a spring return in tip position
LF = lever is fixed in lowering end position

Quick Detail

1. Power: Hydraulic

2. Material:Aluminium and Plastics

3. Pressure:Medium Pressure

Description

1. The Slow Down Dump Truck Controls Manual Valve are used very widely.

2. Almost all the trucks can be use the control valves.Reset the valves for presure liniting valve,with flexible,

long life characteristics,can be combined with air control valve,though the valve opening and closing change

the directions of control flow, play a limited role.

3. The valve is installed in the cab.

4. The valve have lifting,shop,drop and Power Control Switch the control handle,descent valve can be

adjusted freely,it can control the amount of PT gas control valve oil return,stop,down,the positions were

locked, transposition clear.

Product Advantages

1. After install the limit valve, you can choose large displacement pump, the lifting time will be reduced by

20%; This will increase the number of lift cylinder unit time.

2. Limiting valve may reduce the speed of cylinder piston rod stroke end.And the velocity of cylinder piston

rod is an important factor affecting the life of the cylinder,especially in the cold cylinder working coonditions.

3. Avoid the occurrence of impact piston in the cylinder stroke end noise,increase driver's comfort.

4. Increase rervice life of the cylinder and pump.

5. To reduce the efforts of the engine to reduce fuel consumption.

In additon

If you received a product has a problem, please let me know the first time.