AMISCO Electromagnetic Induction Coil EVI 7/9 110V AC 5VA 100% ED 22mm Coil System

AMISCO EVI 7/9 110V AC 5VA 100% ED 22 mm Coil System Pneumatic Electromagnetic Induction Coil

AMISCO solenoid valve coil EVI7/9 AC220V/5VA6VA8.5VA inner hole 9 high

Voltage tolerance: ±10%
Duty cycle: 100%
Standard voltages: 24, 110- 115, 220 - 230VAC ;12. 24VDC
Other voltages or power on request

Power levels, and heating for AC coils are related to Amisco solenoid operators or pilot valves
The coils performance change according to ambient temperature.All the power levels of this page are d 20cAll the previous and following data can be modified by Amisco at any time

Protection Class: IP65 (With connector)
Temperature Ambient Media: -40 to +50 ℃
Electrical connection: DIN43650B EN175301-803.
Weight: 0.1 kg
Model: EVI 7/9

The EVl 7 system by Amisco includes a wide range of 22mmcoils, designed for pneumatic applications.
This coil family is available for tubes with 8,9 and 10mm diameter.

All coils feature:
1. Heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material
2. Class H wire 200°c according to lEC 60317-13
3. Built-in magnetic yoke made by low carbon iron
4. Encapsulation with high quality specially designed glass filled nylon
5. Copper and plastic material used are UL-Listed

The use of other materials is possible upon special agreements.Coils are rated to class F.The coil is designed and
constructed in accordance to EN 60204.1 and VDEO580 and it is suitable for industrial ambient conditions.For use in special ambients with high humidity, we suggest the sealed or thermoset version; please refer to kit for humid application.

The coil is fastened to the solenoid operator by means of a knurled nut for ease of change over without interrupting the pneumatic circuit.

The coil is also in conformity with 2014/34/UE for electrical apparatus of group ll, category 3 (Ex nAl3 GD T3,T4, T5)GAS: Ex nA lIC Tx Gc
DUST: Ex tc llC Tx Dc
For further information about Atex versions, see the "ATEX Products" catalogue.
Coil can be supplied and marked CSA/UL forElectrical Insulation System (EIS) "E300N" , designated by Amisco asAMIH - UL file E343908.
Coil can be supplied and marked EAC for use in Russian Market.
More details about UL and EAC certification can be given on customer request.
The EVl7/9 coils can be equipped with the suitable plunger guide tube [see S8 - S9 Catalogue] or even in combinationwith a complete pilot valve.In this case refer to 22mm 30mm pilot valve system catalogue.
The EVl7/8 coils can be equipped with the suitable plunger guide tube (see S8 - S9 Catalogue).
The coil is fastened to the solenoid operator by means of a knurled nut for ease of change over without interrupting thepneumatic circuit.

We sell separately from the coil, a kit to complete the sealingof the 22mm coil, to be equipped on our 22mm pilot valve.The kit is composed by two O-Rings, a special nut designedfor this application, and the assembly instruction.
Complete valve using coil with terminal has been testedpositively for lP65.
Complete valve using coil with flying leads has been testedpositively for IP67.

A Caution
Use caution for the anti-corrosiveness of finger guide section.
Martensitic stainless steel is used for the finger. However, be aware that its anti-corrosion performance is inferior to austenitic stainlesssteel. ln particular, the finger might be rusted in an environment where water droplets are adhered to it due to dew condensation.

How to Mount the Attachment to the Finger

To mount the attachment to thefinger, make sure to use awrench to support the attachment so as not to applyundue strain on the finger.Refer to the tablebelow for the propertightening torque onthe bolt used forsecuring the attachment to thefinger.

FAQ:

Q: Where is your factory ? Can we visit your factory?

A:Our factory is located in Ningbo City, Zhejiang Province,China, 17kms away from Ningbo Airport. We sincerely welcome customers to visit our company and factory.

Q: Could you add our logo on your products?

A: Yes,if your quantity more than 50pcs. we could add your logo on the products.

Q: How long is your delivery time?

A: Generally it is 1-2 days if the goods are in stock. or it will be 3-5 weeks if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ?
A: Yes, we could offer the sample for free charge, but do not pay the cost of express freight.

Q: What is your payment term and payment way?
A: Payment<=2000USD, 100% in advance.

Payment>=2000USD, 30% T/T in advance ,balance before shippment. Payment ways are : T/T, Western Union, Paypal, Alipay.

Q.What’s the shipping way?

A: For small packages, we will choose the door to door express, we cooperated with UPS,DHL,FEDEX,TNT more than 10 years,we gurantee the shipping cost that we offer to you will be the most favorable price among so many suppliers in China. We will send you the tracking number once we got it.
.
For big orders, By Air or By Sea through your shipping forwarder is acceptable, if you don't have forwarder in China, we will find the most cost-effective one for you.

Warranty

All item Comes with Basic 3 Months Sellers Warranty, if item defective in 3 Months, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.

If item Defective after 3 Months, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.