english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
中文
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
DN40 Synchronous generator Water Solenoid Valves BV2011S water pressure valves
DN40 Synchronous generator Water Solenoid Valves BV2011S water pressure valves Specifications: Motor type Synchronous motor Length of power wire 300 mm Action time 15 s Connect type G thread Shut-off diff. press. 0.6 Mpa Nominal pressure PN16~PN20 Medium temperature 2~95 Power 6W (Only when open the valve) Suitable medium Cold, hot water or 50% Ethanol solution) Vpltage (50/60 Hz) 24VAC/110VAC/220VAC Product type: Product type Control mode Operation principle BV2011S-31 Read More
DN100 4 Inch Water Pressure Valves Threaded 2 Way Brass 2/2 way AC220V DC24V
DN100 4 Inch Water Pressure Valves Threaded 2 Way Brass 2/2 way AC220V DC24V 4" Threaded 2 way Water Solenoid Valve Features: 1. Thread: BSPT, NPT , BSP. 2. Valve body material is brass. 3. Can be operated directly without pressure. 4. Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: 10% , DC Voltage tolerance:1%. 5. The standard product fluid temperature is 80C(NBR). 6. Temperature:fluororubber(130C), Silicon(130C), PTFE(185C). 7. DIN43650A connector Coil is Read More
Original Water Pressure Valves Normal Close Brass 1/4" 1/2" UD-8 UD-15
Original UniD UD series Normal close Brass 1/4" 1/2" Water solenoid valve UD-8 UD-15 Feature 1. UD series is direst-acting, conductive, normal close. 2. Valve body made of forged brass. 3. UD can be operated directly without pressure. 4. Small size and easy assembly. 5. Standard voltage: 110VAC/220VAC/24VDC 6. Other special AC/DC can be made to client's order. 7. Screwed end : BSPT, NPT, BSP. 8. The standard product fluid temperature is 80(NBR). 9. fluororubber(130), Silicon... Read More
High Pressure Timer Auto Water Solenoid Valve / 2 Way Stainless Steel Drain Valve
2 Way High Pressure Timer Auto Water Solenoid Stainless Steel Drain Valve Specifications With timer,automatically drain at settled time. Widely used in filter mahine,separator,air tank,dripping feet and other air compressor system parts.Drain lasting time and separation time is adjustable. Voltage: 24VDC/110VAC/220VAC Port size: 1/2" Power: 20 Watt Water proof grade: IP65 Item Material Body Stainless Steel Seal NBR,EODM,FKM Amature tube stainless steel 304 Plunger Read More
2 Way Normally Closed Water Solenoid Valve
UNID UW-20 Water Valve 2 way Full Copper Normally Closed Solenoid Valve brass water solenoid valve Description 1. Using direct diaphragm structure to start without pressure expands its application field. 2. The flat diaphragm structure is reliable in opening and closing, and the service life of the product is enhanced. 3. Choosing plastic-encapsulated coil can improve the safety of the product in many environments. Application There are many kinds of solenoid valves. Read More
2W400-40 1.5" Threaded 2 Way Water Solenoid Valves Operated Directly Without Pressure
2W400-40 1.5" Threaded 2 Way Water Solenoid Valves Operated Directly Without Pressure 2W400-40 1.5" Threaded 2 way Water Solenoid Valve Features: 1.Pilot diaphragm drive, normally closed. 2.Valve body material is brass. 3.Can be operated directly without pressure. 4.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: 10% , DC Voltage tolerance:1%. 5.Other special AC/DC can be made to client's order. 6.Thread: BSPT, NPT , BSP. 7.The standard product fluid Read More
0-20Bar 2 way 1/4" UNID High Pressure Direct-Acting Conductive Water Solenoid Valves
0-20Bar 2 way 1/4" UNID High Pressure Direct-Acting Conductive Water Solenoid Valves 1.Direct-Acting, conductive, normally closed. 2.Valve body material is forged brass. 3.Can be operated directly without pressure. 4.Small size and easy assembly. 5.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: 10% , DC Voltage tolerance:1%. 6.Other special AC/DC can be made to client's order. 7.Thread: BSPT, NPT , BSP. 8.The standard product fluid temperature is 80C(NBR). 9 Read More
Stainless Steel Direct-Acting Water Solenoid Valves
2S025-08 2 Way Stainless Steel Direct-Acting Normal Temperature Water Solenoid Valves Features: 1.Direct-Acting, conductive, normally closed. 2.Valve body material is Stainless steel. 3.Can be operated directly without pressure. 4.Small size and easy assembly. 5.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: 10% , DC Voltage tolerance:1%. 6.Other special AC/DC can be made to client's order. 7.Thread: BSPT, NPT , BSP. 8.The standard product fluid temperature Read More
3/8" High Pressure Stainless steel Direct-Acting Water Solenoid Valves 2WH020-10 UD-10H
3/8" High Pressure Stainless steel Direct-Acting Water Solenoid Valves 2WH020-10 UD-10H Features: 1.Direct-Acting, conductive, normally closed. 2.Valve body material is forged brass. 3.Can be operated directly without pressure. 4.Small size and easy assembly. 5.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: 10% , DC Voltage tolerance:1%. 6.Other special AC/DC can be made to client's order. 7.Thread: BSPT, NPT , BSP. 8.The standard product fluid temperature Read More
