TN - 16x50S Pneumatic Air Cylinders Twin - Rod Cylinder 16mm Bore 50mm Stroke

TN - 16x50S Pneumatic Air Cylinders Twin - Rod Cylinder 16mm Bore 50mm Stroke
 
Ordering Code: TN-16x50S, Any other types please contact freely. 
 
Order code

Note:
1) TN series are alll with magnet
2) When the thread is standard, the code is blank

Product Features
1.Enterprises standard is implemented.
2. Mounting holes on three sides facilitates multi-position mounting.
3.It is good resistance to bending and twisting moments.

4.Embeded installation and fixation mode saves the installation space.
5.Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
6.Standard configuration of this series has magnet and the type without magnet is not available.

Specifications

Material of the major parts

Structures

 

Installation Usage
1.When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.The medium used by cylinder shall be filtered to 40μm or below.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops,     oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.As both the front cover and piston are short, too large stroke can not be ed.
6.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
7.The cylinder shall avoid redial load in operation to maintain the normal and extend service life.

8.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, Please do not dismantle the fixed block or cylinder cover .

Product show

 
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
 
After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
 
Competitive Advantage

Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.