Nbr Rod Seal Small Air Cylinder 50 To 500mm / S Brass Nut Mxh20-50 Mxh16-30

MXH20-50 MXH16-30 50 to 500 mm/s Brass Nut NBR Rod seal Air cylinders

How to Mount a Workplece
Workpieces can be mounted on 2 surfaces of the compact slide.
Since the table is supported by the linear guide, take care not to ap-
ply strong impact or large moment, etc. when mounting workpieces.o Hold the table when fastening workpieces to it with bolts, etc. If thebody is held while tightening bolts, etc., the guide section will besubjected to a large moment, and there may be a loss of precision.

A Caution
1. Do not place your fingers in the clearance between the non-ro-
tating plate and the cylinder tube. Your fingers could get caughtbetween the table and the cylinder tube when the piston rod re-tracts. If fingers are caught in a cylinder, there is a danger of in-jury due to the strong cylinder output, and therefore cautionmust be exercised.
2. In terms of the load mass and moment, the cylinder must be op-erated below the maximum load mass and allowable moment.
3. If the output of the compact slide is applied directly to the table,make sure it is applied along the rod axial line. (Refer to thefigure below.)

The use of an endless track linear guide produces atable cylinder having excellent rigidity, linearity andnon-rotating accuracy.
The use of an endless track linear guide produces atable cylinder having excellent rigidity, linearity andnon-rotating accuracy.

Specifications

Theoretical Output

Mass

Dimensisons

Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
 

Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.