|Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, Chinaemail@example.com|
|Place of Origin:||Ningbo|
|Model Number:||4V320-08 4V320-10|
|Minimum Order Quantity:||10 pcs|
|Packaging Details:||carton,pallet or according to customers' requirement|
|Delivery Time:||3 working days after receiving the customers' payment|
|Payment Terms:||T/T,Western Union,Paypal|
|Supply Ability:||15000 pcs per month|
|Model Code:||Airtac 4V320-10||Port Size:||3/8"|
|Voltage:||DC24V AC220V||Valve Type:||5/2 Way|
pulse solenoid valve,
pneumatic diaphragm valves
Model No: 4V320-08 4V320-10
Place of Origin: Zhejiang,China (Mainland)
Standard or Nonstandard: Standard
|Fluid||Air(to be filtered by 40pm fillter element)|
|Port size||ln=Out=Exhaust=1/4"||ln=Out=3/8" Exhaust=1/4"|
|Valve type||5 port 3 position||5 port 2 position||5 port 3 position||5 port 2 position|
|Material of body||Aluminum alloy|
|Max.frequency||4 cycle/sec||3 cycle/sec||4 cycle/sec||3 cycle/sec|
|Weight||4V310-08:310g 4V320-08:400g||450g||4V310-10:310g 4V320-10:400g||450g|
|1||Connector||9||Wear ring||17||Override spring|
|2||Coil net||10||Bottom cover||18||Manual override|
|3||Coil||11||Fixed screw||19||Spring holder|
|4||Armature||12||Spool spring||20||Return spring|
|5||Fixed plate||13||Bottom cover gasket||21||Side cover|
Flow chart :
|Our product features||Our Services Guarantee:|
|1) Competitive price||1) Prompt respond (Reply with 24 hours)|
|2) Good quality||2) Free Samples (Customer pay for the delivery cost)|
|3) Professional Packaging||3) Registration support.|
|4) Produce according to Customers’ instruction||4) Photos/videos are available during production.|
|5) None delay shipment||5) Loading inspection, and send loading photos before shipment.|
The installment introduction:
1. First, Confirm the pulse valve in good condition and then installed
2. Pulse valve will be installed directly the outer wall of flange of gas manifold. The spray pipe across the gas manifold. According to the drawing and manual, the pulse valve matching appropriate spray pipe and installation. To avoid the valve install in the air manifold bottom. If the pulse valve matched trachea and connector, the connector will be used for sealing purpose only. It can not as structural support components. It can not rely on the straight connector fixed spray torch and package. The spray pipe and air manifold must be fixed independent.
3. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. To ensure that provide compressed air clean and dry. The air manifold system provides moderate pressure and check for leaks installation. ( it can brush on soap and water, check whether the interface is bubble). Pressure was carried out on the air bag inflated (pressure of the valve is around 0.03 ~ 0. 86 mpa), recommend for air pressure 0.8 mpa maximum
6. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
The exhaust chamber volume of improved DMF pulse valve is increased. The permeability magnetic material of pulse valve is increased, and also, the materials of structure of diaphragm and pressure spring are improved, so that the exhaust volume of valve is increased to raise the magnetic strength and sensitivity as well as the element reliability and operation stability of pulse valve. Its service life will be greatly prolonged.
Contact Person: Jaren