Aluminium Compact guide cylinder GMP Series 25mm Stroke Pneumatic Air Cylinders MGPM32-25

Aluminium Compact guide cylinder GMP Series 25mm Stroke Pneumatic Air Cylinders MGPM32-25
 
Ordering Code: MGPM32-25, Any other types please contact freely. 

Order code

Installations

1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Dirty substances in the pipe must be cleared away before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
7.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, never dismantle the fixed block or cylinder cover without permission.

8.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

Specifications

Manufacture of Intermediate Strokes

Structures
1. ø12 to ø25/MGPM, MGPL

2. ø32 to ø63/MGPM, MGPL

3. ø80, ø100/MGPM, MGPL

Product show

Products Shopping Guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.

Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.

After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.

Competitive Advantage

Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.