|Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, Chinaemail@example.com|
|Place of Origin:||China, USA|
|Brand Name:||ASCO or OEM|
|Minimum Order Quantity:||1 piece|
|Packaging Details:||Boxes, Cantons, Plastic bags|
|Delivery Time:||within 1-30 working days after payment|
|Payment Terms:||T/T in advance,Western Union,Paypal,Credit card|
|Supply Ability:||2000 pcs|
|Body:||Aluminium||Core Tube:||Stainless Steel|
|Seals & Disc:||NBR (nitrile)||Differential Pressure:||0,35 - 8,5 Bar [1 Bar = 100kPa]|
|Ambient Temperature Range:||-20 To +85°C|
1.5 Inch Pulse Jet Valves,
24VDC Pulse Jet Valves
• The pulse diaphragm valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to produce reliable and economical operation
• Integral pilot operated valves satisfy all relevant EC directives
|Ordering Code||Port Size||Orifice||Flow Value||Coil type|
|Core tube||Stainless steel|
|Core and Plugnut||Stainless steel|
|Core Spring||Stainless steel|
|Sealing & disc||CR (chloroprene)|
|Voltage||DC: 24V, AC: 24V,48V,110V,230V|
|Working Temperature||-20 to +85℃|
|Coil Insulation Class||F|
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.
The installment introduction:
1. First, Confirm the pulse valve in good condition and then installed
2. Pulse valve will be installed directly the outer wall of flange of gas manifold. The spray pipe across the gas manifold. According to the drawing and manual, the pulse valve matching appropriate spray pipe and installation. To avoid the valve install in the air manifold bottom. If the pulse valve matched trachea and connector, the connector will be used for sealing purpose only. It can not as structural support components. It can not rely on the straight connector fixed spray torch and package. The spray pipe and air manifold must be fixed independent.
3. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. To ensure that provide compressed air clean and dry. The air manifold system provides moderate pressure and check for leaks installation. ( it can brush on soap and water, check whether the interface is bubble). Pressure was carried out on the air bag inflated (pressure of the valve is around 0.03 ~ 0. 86 mpa), recommend for air pressure 0.8 mpa maximum
6. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.