|Xikou,Fenghua,Zhejiang Province, Chinaemail@example.com|
|Place of Origin:||China|
|Minimum Order Quantity:||1 piece|
|Packaging Details:||Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement|
|Delivery Time:||within 1-7 working days after payment|
|Payment Terms:||T/T , Western Union|
|Supply Ability:||1000 pcs|
|Working Temperature:||-10 °C To +80 °C||Proof Pressure:||1.5MPa|
pneumatic actuator cylinder,
smc pneumatic cylinder
Compact Guide Pneumatic Air Cylinders MGPM16G - 30Nil Tri - Axial Cylinder GMPM 16*30
Ordering Code: MGPM16G-30Nil, Any other types please contact freely.
|Max. operating pressure||1.0MPa|
|Min. operating pressure||ø12, ø16||0.12MPa|
|ø20 to ø100||0.1MPa|
|Ambient and fluid temperature||–10 to 60° C (with no freezing)|
|Piston speed||ø12 to ø63||50 to 500mm/s|
|ø80, ø100||50 to 400mm/s|
|Cushion||Rubber bumper at both ends|
|Stroke length tolerance||0~+1.5mm|
Manufacture of Intermediate Strokes
|Part number||Refer to standard part numbers and ordering procedure.||Indicate -XB10 at the end of the standard model
no. Refer to P.52 for order made specifications.
|ø12, ø16||1 to 249||ø12, ø16||11 to 249|
|ø20, ø25, ø32||1 to 399||ø20, ø25||21 to 399|
|ø40 to ø100||5 to 395||ø32 to ø100||26 to 399|
|Example||Part no.: MGPM20—39
A spacer 1mm in width is installed in a
MGPM20—40. C dimension is 77mm.
|Part no.: MGPM20—39—XB10
Special body manufactured for 39mm
stroke. C dimension is 76mm.
1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.The medium used by cylinder shall be filtered to 40μm or below.
4.Dirty substances in the pipe must be cleared away before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
6.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
7.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, never dismantle the fixed block or cylinder cover without permission.
8.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
1. ø12 to ø25/MGPM, MGPL
2. ø32 to ø63/MGPM, MGPL
3. ø80, ø100/MGPM, MGPL
|Our product features||Our Services Guarantee:|
|1) Competitive price||1) Prompt respond (Reply with 24 hours)|
|2) Good quality||2) Free Samples (Customer pay for the delivery cost)|
|3) Professional Packaging||3) Registration support.|
|4) Produce according to Customers’ instruction||4) Photos/videos are available during production.|
|5) None delay shipment||5) Loading inspection, and send loading photos before shipment.|
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.