3/4" Aluminium Alloy Dust Collector Valve Pulse Jet Solenoid Valve 304 SS Spring

1. Product Name: CA20DD FLY/AIRWOLF Diaphragm Valves DD Series dust collector pulse valves 3/4" Aluminium Alloy Pulse Solenoid Valve

2. Order code

3. Installation

For your safety do not pressurise system until all valves and pipes are fully secured. Do not attempt to remove a fitted valve while system is under pressure. 1. Prepare supply and blowtube pipes* to suit valve specification. Avoid installing valves underneath the tank. 2. Ensure tank and pipes are free from dirt, rust or other particulate. 3. Ensure supply air is clean and dry. 4. Mount valve to inlet pipes and blowtube to valve, tighten dresser nut. 5. Tanks and pipes must be independently restrained from valve. 6. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only). 7. Apply moderate pressure to system and check for installation leaks. 8. Fully pressurise system. 9. Test fire and listen for proper actuation and crisp pulse noise.

4. Description

High performance diaphragm valve with dresser nut ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet.

5. Construction

6. Operation

8. Maintenance

Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.

9. Approvals

Integrally piloted valves meet the requirements of:

• Atex II 2D Mechanical

• CSA (C&US), C22.2 No. 139-1982 UL Std No. 429

• C-Tick - integral pilots

• EMC (89/336/CE) - integral pilots

10. Drawing

11. Product show

12. Serves time
0:00 - 23:59
From Monday to Sunday